Matyssek achieves maximum welding speeds with Cold Weld
The system consists of two stations and a 7-axis QRC-E 350 robot. The robot is mounted on a floor track and can move flexibly back and forth between the two stations. Due to its long reach, it can be easily guided around corners or into niches. The rotary and swivel positioner always moves the complex workpiece into an optimum position for welding. The component - here a hood - is welded using the Cold Weld process. The increased deposition rate with Cold Weld results in enormous welding speeds for thin sheets. At the same time, the material is only exposed to minimal heat, so that the original material properties remain largely unchanged and any reworking is reduced to a minimum.